Quilling Car

Take a challenge to make a Quilling car and share a picture of it with the Community.

Materials needed:

• Quilling strips
• Craft glue
• Tweezers
• Quilling needle

Follow along as we demonstrate the essential tools and materials needed for this project, including quilling paper strips, a quilling needle tool, craft glue, and a quilling board. We'll provide clear, easy-to-follow instructions, making this tutorial suitable for both beginners and quilling enthusiasts.

Hi everyone! Let's make a Quilling car today!

To make a car we are going to make two squares, a small one and a big one, and 4 tight coils which will be the wheels.

Here I am going to take 3 Paper strips and paste them together to form a long strip, now once that is done start rolling it using a quilling needle, take out the coil, and let it loose, you can loosen it as much as you like.

Now once the coil is of the desired shape, let's shape it into a square by making a marquise first (pinching from two sides) and then pinching again from the two sides of the marquise. And here is the bigger square ready.

Now do the same thing for making a smaller square, the only difference is we are using only 2 strips to make a smaller square, Roll it, loosen it out, Paste the end, and shape it,

Now let's paste this smaller square into the bigger square.

To make wheels, we are going to take 2 paper strips, let me tell you how we are going to take one white strip, then another half of a white strip, and then another half of a black strip, Paste them together and start rolling it from the white side. We will make a tight coil here for the wheels. Make three more of this.

And the final step paste them all together. Two wheels on the small square and two wheels on the bigger square and it's done! We have our 3D car ready!